Anderson weight distribution hitch is a well-known and trusted brand when it comes to hitches.
However, there have been some reports of problems with their products.
In this article, we will take a look at some of the most common issues that have been reported.
Most Common Andersen Weight Distribution Hitch Problems with Solutions: At A Glance
| Problem | Solution |
|---|---|
| Squeaking and rattling noises | Check that the hitch is properly greased. Check that there is no damage to the hitch. Use anti-seize compound on bolts and brackets. |
| Loose connection between the trailer and the hitch | Tighten all bolts and brackets. Check that the hitch is properly greased. Check that the chains are properly attached. |
| Uneven weight distribution | Adjust the tension on the chains. Add or remove weight from the trailer tongue. Equalize the weight distribution by adding weight to the front or rear of the trailer. |
| Swaying | Reduce the speed at which you are traveling. Increase the tension on the chains. Add weight to the trailer tongue. |
| Trailer not tracking straight | Adjust the weight distribution. Check that the chains are properly attached. Check that the hitch is properly greased. |
10 Common Andersen weight distribution hitch problems And Solutions In Detailed
There have been a few different problems that have been reported with Andersen weight distribution hitches. Here are the top 10:
- Squeaking and rattling noises
- Difficulty in attaching or detaching
- Loose connection between the trailer and the hitch
- Uneven weight distribution
- Swaying
- Trailer not tracking straight
- Difficulty in making turns
- Broken bolts or brackets
- Limited adjustability
- Loosen over time
Squeaking and rattling noises:
One of the most common problems that have been reported with Andersen weight distribution hitches is that they tend to make a lot of noise.
This can be quite annoying, especially if you are trying to tow a heavy load.
The cause of this problem is usually due to the fact that the hitch is not properly lubricated.
You can solve this problem by simply applying some lubricant to the hitch.
Difficulty In Attaching Or Detaching:
Another common problem that has been reported is that it can be quite difficult to attach or detach the Andersen weight distribution hitch.
This is usually due to the fact that the hitch is not properly aligned.
You can solve this problem by making sure that the hitch is properly aligned before you try to attach or detach it.
Loose connection between the trailer and the hitch:
A loose connection between the trailer and the hitch can also be a problem.
This can cause the trailer to swing or sway when making turns, and it can also make it difficult to keep the trailer going in a straight line.
The solution to this problem is to make sure that the connection between the trailer and the hitch is tight and secure.
Uneven Weight Distribution:
If the weight of the trailer is not evenly distributed, it can cause problems with the Andersen weight distribution hitch.
This can lead to the trailer swaying or not tracking straight.
To solve this problem, make sure that the weight of the trailer is evenly distributed.
You can do this by placing heavier items towards the front of the trailer, and lighter items towards the back.
Swaying:
If the trailer starts to sway from side to side, it can be a sign that the Andersen weight distribution hitch is not properly installed or adjusted.
To fix this, you will need to check the installation and make sure that everything is tight and secure.
You may also need to readjust the hitch to find the sweet spot for your particular setup.
The Trailer Not Tracking Straight
One common problem that has been reported with Andersen weight distribution hitches is that the trailer does not track straight.
This can be caused by a number of different factors, but the most likely cause is that the hitch is not properly adjusted.
If the hitch is not level, or if the chains are not tight enough, this can cause the trailer to veer off to one side or the other.
This can be dangerous, and it can also make it difficult to keep the trailer in a straight line when you are driving.
There are a few different ways that you can fix this problem.
First, you can try adjusting the hitch itself. If the hitch is not level, this can cause the trailer to pull to one side or the other.
You can also try adjusting the chains. If the chains are too loose, this can also cause the trailer to veer off to one side or the other.
If adjusting the hitch and chains does not fix the problem, you may need to take your trailer to a professional to have it aligned.
This is something that you should do if you are having difficulty keeping your trailer in a straight line.
Difficulty In Making Turns
Another common problem that has been reported with Andersen weight distribution hitches is that they can make it difficult to make turns.
This is usually caused by the fact that the hitch is not properly adjusted. If the chains are not tight enough, this can cause the trailer to swing out when you make a turn.
This can be dangerous, and it can also make it difficult to keep the trailer under control.
There are a few different ways that you can fix this problem.
First, you can try adjusting the chains. If the chains are too loose, this can cause the trailer to swing out when you make a turn.
You can also try adjusting the hitch itself. If the hitch is not level, this can also cause the trailer to swing out when you make a turn.
If adjusting the hitch and chains does not fix the problem, you may need to take your trailer to a professional to have it aligned.
This is something that you should do if you are having difficulty keeping your trailer under control.
Broken bolts or brackets
Another common problem that has been reported with Andersen weight distribution hitches is that the bolts or brackets can break.
This is usually caused by the fact that the hitch is not properly adjusted.
If the chains are too loose, this can cause the bolts or brackets to break. This can be dangerous, and it can also make it difficult to keep the trailer under control.
There are a few different ways that you can fix this problem. First, you can try adjusting the chains.
If the chains are too loose, this can cause the bolts or brackets to break. You can also try adjusting the hitch itself.
If the hitch is not level, this can also cause the bolts or brackets to break.
If adjusting the hitch and chains does not fix the problem, you may need to take your trailer to a professional to have it repaired or replaced.
This is something that you should do if you are having difficulty keeping your trailer under control.
Limited adjustability
Another common problem that has been reported with Andersen weight distribution hitches is that they have limited adjustability.
This means that it can be difficult to get the hitch to work properly for your particular situation.
This can be dangerous, and it can also make it difficult to keep the trailer under control.
Loosen over time
One of the most common problems that have been reported with Andersen weight distribution hitches is that they tend to loosen over time.
This can be a major problem, as it can cause the hitch to become disconnected from the trailer, or even cause the trailer to come detached from the vehicle.
The best way to prevent this from happening is to regularly check the hitch for any loosening and to tighten it down if necessary.
How do I adjust my Andersen weight distribution hitch?
There are a few different ways that you can adjust your Andersen weight distribution hitch.
First, you can try adjusting the chains. If the chains are too loose, this can cause the trailer to veer off to one side or the other.
You can also try adjusting the hitch itself. If the hitch is not level, this can also cause the trailer to veer off to one side or the other.
If adjusting the hitch and chains does not fix the problem, you may need to take your trailer to a professional to have it aligned.
This is something that you should do if you are having difficulty keeping your trailer in a straight line.
Do Andersen weight distribution hitch a good Brand?
There are mixed reviews on whether or not Andersen weight distribution hitches are a good brand.
Some people have had good experiences with them, while others have had problems.
If you are having difficulty keeping your trailer in a straight line, you may want to take it to a professional to have it repaired or replaced.
FAQs About Andersen weight distribution hitch
How Often Should I Check My Andersen Weight Distribution Hitch?
You should check your Andersen weight distribution hitch every few months to make sure that it is still in good working condition.
You should also check it after any major changes to your trailer, such as adding or removing weight.
How Do I Know If My Andersen Weight Distribution Hitch Needs To Be Replaced?
If your Andersen weight distribution hitch is not working properly, you may need to take your trailer to a professional to have it repaired or replaced.
Can I Install My Andersen Weight Distribution Hitch Myself?
If you are not familiar with how to install a weight distribution hitch, you should take your trailer to a professional to have it installed.
Conclusion
Now you know some of the most common problems that can occur with Andersen weight distribution hitches.
You also know how to prevent these problems from happening, and what to do if they do occur.
If you are having difficulty keeping your trailer in a straight line, you may need to take it to a professional to have it repaired or replaced.