How To Tie Down A Motorcycle On A Hitch Carrier

When it comes to hitches, there are a lot of different types to choose from.

But if you have a motorcycle, you’re going to need a hitch carrier to transport it.

Not sure how to tie down a motorcycle on a hitch carrier?

So, how to tie down a motorcycle on a hitch carrier?

In this blog post, we’ll walk you through the process of tying down a motorcycle on a hitch carrier.

How to Tie Down a Motorcycle on a Hitch Carrier?

Here is the step by step guide to tying down a motorcycle on a hitch carrier:

Step 1: Installation

A motorcycle wheel chock is essential for any Rider.

Your bike will be pulled inward towards the Choke when you use properly positioned straps.

This is usually a good thing because it helps to keep your bike more stable and secure.

Step 2: Wrap Front Soft Loops

Insert the left-side soft loop over the left fork tube and under the control cable, ideally near the triple clamps to prevent pulling too hard on any one specific spot.

Follow with your right side soft loop, again ideally around or near the triple clamp.

There are different variations in how this is done.

And you may need to play with the positioning a bit to find what works best for your bike and how it’s positioned on the carrier.

Step 3: Secure Hook End

The third step in our process is to secure the hook end of the tie down straps with a ratchet or cam buckle.

This can be done by wrapping the strap around some sort of stationary object, like a bumper or fence post.

However, we recommend using a ratchet or cam buckle so that your tie downs are tightened evenly and securely.

You can also use the hooks that came with your straps or purchase additional hooks from any home improvement or automotive shop.

Step 4: Pull slack

Pull the slack from the tie-down strap until there is no slack left to pull.

Some straps have a sewn loop on the opposite end that can be pulled through using a ratchet.

In this case, do not use the sewn loop with pre-tied knots.

If you are using a ratchet strap, pull the slack until there is no more to be pulled, and then tighten the ratchet until you have a tight strap.

Make sure that there is enough room in the ratchet to still turn it as you tighten, or else you may end up damaging your tie-down straps by over-tightening them.

Step 5: Repeat

For the right side handlebar, follow these initial three steps again.

Because of the space constraints on the hitch carrier, it may be necessary to have one person hold each handlebar in place as you tie it down.

At this point, you should have successfully secured your motorcycle to the hitch carrier and can safely continue on your ride.

Step 6: Soft Loop Rear Tie-Down

Most hitch carriers have soft loops or tie-down points on the carrier where you can attach the straps.

These points should be sturdy and able to support the weight of the motorcycle.

Step 7: Double Check

If your motorcycle is connected to the hitch carrier and all of the straps are securely fastened, it is important to double-check that everything is in place before driving away.

So that your bike doesn’t fall off of the carrier while you’re driving.

It’s important to check all of the straps and make sure that they are tight and secure.

You can simply tug on the straps to make sure that they won’t slip or loosen during your journey.

How Much Weight Can A Motorcycle Hitch Carrier Hold?

Motorcycle hitch carriers can hold up to 400 pounds.

You can buy a motorcycle hitch carrier up to 400 pounds weight that is meant for a single bike.

The capacity of this carrier will completely depend upon your bike weight and the wheelbase of your motorcycle.

You need to choose a carrier according to their different capacities like 350-400, 300-350, or 200-300 pounds of weights.

Here is a table that shows how much weight different types of motorcycle hitch carriers can hold:

Type of Carrier	Weight Capacity
Single-rail carrier	Up to 400 pounds
Double-rail carrier	Up to 800 pounds
Tilting carrier	Up to 600 pounds
Folding carrier	Up to 400 pounds

Mistakes You Should Avoid While Securing A Motorcycle On A Hitch Carrier

When it comes to securing a motorcycle on a hitch carrier, there are quite a few mistakes that you want to avoid at all costs.

Below we’re going to show you what those mistakes are so that you can learn from them.

1. Not Using An Anti-Theft Device

One of the biggest mistakes that you can make when it comes to securing your motorcycle on a hitch carrier is not using an anti-theft device.

By investing in an anti-theft lock, you’ll be able to keep your motorcycle safe from thieves who might try to steal it.

2. Not Using A Heavy-Duty Tie Down

Another mistake that many people make when it comes to securing their motorcycle on a hitch carrier is not using a heavy-duty tie down.

A good tie down is essential for ensuring that your motorcycle will be secure during transport, and you should definitely invest in one if you don’t already have one.

3. Not Securing The Wheels Or Tires

When it comes to securing your motorcycle on a hitch carrier, it’s also important that you don’t forget to secure the wheels or tires.

Motorcycle tires can easily fall off if they aren’t properly secured, which could cause damage or injury if you’re driving along a road.

By following these tips, you’ll be able to keep your bike safe during transport and avoid any headaches or accidents along the way.

How Fast Can You Drive With A Hitch Carrier?

For your safety and the integrity of your hitch carrier, it is imperative that you drive at or below 90 mph.

The faster you drive, the more pressure is applied to your hitch carrier and it may loosen or even detach from your vehicle.

If you plan on driving at high speeds with a hitch carrier attached to your vehicle, it is essential that you take proper precautions to ensure the safety of yourself and others on the road.

This includes properly securing your motorcycle to the hitch carrier with tie-downs or straps, driving at speeds below 90 mph, and getting regular maintenance on your hitch carrier to ensure its good condition.

FAQs on How To Tie Down A Motorcycle On A Hitch Carrier

Conclusion

Now you know that how to tie down a motorcycle on a hitch carrier is important for your safety and the integrity of your hitch carrier while driving at high speeds.

Also, know what mistake to avoid when driving with a hitch carrier and how to get regular maintenance on your hitch carrier to ensure its safety.

Whether you are transporting your bike for long distance road trips or simply need to securely store it in your garage, using a hitch motorcycle carrier is a smart choice for any rider.