Most people think that a weight distribution hitch is only meant to be used with a solid axle suspension.
However, a weight distribution hitch can also be used with an air suspension.
In fact, it can actually provide you with some benefits that you wouldn’t get if you didn’t use one.
So, if you have an air suspension on your vehicle and are wondering if a weight distribution hitch is right for you, keep reading to find out more.
Can You Use A Weight Distribution Hitch With Air Suspension?
Yes, a weight distribution hitch can be used with air suspension.
Weight distribution hitches are designed to redistribute the tongue weight of a trailer to all of the axles of the vehicles pulling it, including the trailer axles.
This increased stability helps to reduce sway and keep the vehicles in better control while driving.
When using a weight distribution hitch with an air suspension, it is important to make sure that the proper amount of weight is distributed in order for the system to work properly.
Things to Do When Using Air Suspension With Weight Distribution Hitch
The first step when using a weight distribution hitch with an air suspension is to ensure that it is properly installed and adjusted according to the manufacturer’s instructions.
This includes adjusting the spring bars and chain tensioner so that they evenly distribute the tongue weight across all axles.
It is important to adjust them based on your vehicle’s rated capacity so as not to exceed its limits.
Once it is properly adjusted, you will want to check that there are no signs of wear or damage on any components; if there are, then you will need to replace them before continuing with the installation.
Next, you must check that all tires are inflated correctly for maximum load-carrying capacity and safety during travel.
This includes both your vehicle’s tires as well as those on your trailer.
You should also inspect your trailer’s frame and axle systems before attaching any hitching components like the chains and spring bars of a weight distribution hitch.
Once your vehicle has been properly prepared, you can go ahead and attach your weight distribution hitch according to its specified instructions.
It includes connecting it between both tow vehicles and trailers as well as connecting its spring bars at either side of its ball mount head assembly at exactly 90 degrees angle between each other.
Make sure there is sufficient slack in your chains so they don’t become too tight when traveling over bumps or uneven terrain.
This could cause excessive wear on parts or even failure of components altogether if not taken into consideration correctly prior to use.
How To Set Up Weight Distribution Hitch With Air Suspension?
Many people want to know the easiest way to set up a weight distribution hitch system with air suspension.
We will help you to understand the process:
1. Select the Appropriate Weight Distribution Hitch
The first step in setting up a weight distribution hitch with air suspension is to select the appropriate hitch for your vehicle.
There is a variety of different weight distribution hitches on the market, so it is important to choose one that is designed for your specific vehicle.
2. Install the Weight Distribution Hitch
Once you have selected the appropriate hitch, the next step is to install it.
This process will vary depending on the make and model of your vehicle, but most hitches can be installed using basic hand tools.
3. Adjust the Air Suspension
After the hitch has been installed, the next step is to adjust the air suspension.
This can be done by adding or removing air from the suspension system until it is properly balanced.
4. Connect the Trailer
The final step in setting up a weight distribution hitch with air suspension is to connect the trailer.
This can be done by attaching the trailer’s coupler to the hitch’s ball mount.
Once the trailer is properly connected, it should be level with the ground.
5. Test Everything Before Towing
Once everything has been properly installed and adjusted, it is important to test everything before towing.
This can be done by gently pulling on the trailer to make sure that it is properly attached and that there is no slippage.
Benefits Of Using Weight Distribution Hitch With Air Suspension
There are a number of benefits to using a weight distribution hitch with air suspension including:
1. More Control
One of the primary benefits of using a weight distribution hitch with air suspension is that it provides more control over the trailer.
With a traditional weight distribution hitch, the trailer is connected to the tow vehicle with a series of chains or bars.
This can allow the trailer to bounce around while being towed, which can make it difficult to control.
2. Smoother Ride
Another benefit of using a weight distribution hitch with air suspension is that it provides a smoother ride.
The air suspension system helps to absorb shocks and bumps, which can make the ride more comfortable for both the driver and passengers.
3. Better Fuel Economy
Using a weight distribution hitch with air suspension can also help to improve fuel economy.
The reason for this is that the air suspension system helps to reduce drag on the tow vehicle, which can lead to better fuel efficiency.
4. Increased Safety
Another benefit of using a weight distribution hitch with air suspension is that it can help to increase safety.
The reason for this is that the air suspension system helps to keep the trailer level, which can prevent it from tipping over in sharp turns or on uneven roads.
5. Easier to Hook Up
Finally, another benefit of using a weight distribution hitch with air suspension is that it is often easier to hook up than a traditional weight distribution hitch.
This is because the airbags can be inflated or deflated as needed, which makes it easier to line up the hitch with the tow vehicle
FAQs on using a weight distribution hitch with air suspension
What Is A Weight Distribution Hitch?
A weight distribution hitch is a device that is used to distribute the weight of a trailer evenly across the axle of a tow vehicle.
This helps to improve the stability of the tow vehicle and prevents the trailer from becoming overloaded.
How Does A Weight Distribution Hitch Work?
A weight distribution hitch uses a system of springs and bars to distribute the weight of the trailer evenly across the axle of the tow vehicle.
This helps to improve the stability of the tow vehicle and prevents the trailer from becoming overloaded.
Can You Use A Weight Distribution Hitch With Air Suspension?
Yes, you can use a weight distribution hitch with an air suspension.
However, you will need to make sure that the airbags on your suspension are inflated to their proper level in order to prevent damage to your suspension system.
How Do You Properly Inflate Airbags On Your Suspension System?
In order to properly inflate airbags on your suspension system, you will need to consult your owner’s manual for specific instructions.
Generally, you will need to use an air compressor to inflate the airbags to their proper level.
What Are Some Benefits Of Using A Weight Distribution Hitch?
Some benefits of using a weight distribution hitch include improved stability for the tow vehicle, prevention of trailer overload, and improved braking performance.
Conclusion
So, now you know that a weight distribution hitch can be used with air suspension.
When using this type of hitch with an air suspension system, it is important to make sure that the correct amount of weight is distributed in order for the system to work properly.
By following these simple tips, you can help keep your vehicle and trailer stable while driving, even when travelling on rough roads or through windy areas.